สถิติ
เปิดเว็บ | 27/04/2012 |
อัพเดท | 19/08/2020 |
ผู้เข้าชม | 505,560 |
เปิดเพจ | 682,416 |
สินค้าทั้งหมด | 128 |
บริการ
-
หน้าหลัก
-
สินค้า
-
Anemometer
-
เครื่องวัดคุณภาพน้ำ
-
Clamp Meters
-
Coating Thickness Gauge
-
CALIBRATION EQUIPMENT
-
Data-Logger
-
Humidity/Temperature
-
Infrared thermometer
-
Moisture Meter
-
Pressure Gauge
-
Sound Level Meter
-
Thermal Imaging Camera
-
Thermometer
-
Tachometers/Stroboscopes
-
Tension meter
-
temperature probe
-
Ultrasonic Thickness Gauge
-
Ultrasonic flowmeter
-
Vibration Meter
-
ติดต่อเรา
เครื่องวัดความหนาแบบ Ultrasonic รุ่น UTG-2600
ข้อมูลสินค้า - เครื่องวัดความหนาแบบ Ultrasonic รุ่น UTG-2600
-
รหัสสินค้า
รุ่น
เครื่องวัดความหนาแบบ Ultrasonic รุ่น UTG-2600
ลิงค์
http://www.phase2plus.com/ultrasonicthicknessgauges/utg-2600.htm
-
แก้ไขล่าสุดเมื่อ
29/03/2014 10:45
ดาวน์โหลดไฟล์ PDF
-
รายละเอียดสินค้า
NEW! Ultrasonic Thickness Gauge
w/ Thru Coating Capabilitiesเครื่องวัดความหนารุ่นนี่สามารถทำการวัดทะลุผ่านชั้นสีที่เคลือบอยู่บนวัสดุ steel, aluminum, titanium,
plastics, ceramics, glassเพื่อทำการวัดความหนาสามารถเลือกหน่วย การวัด เป็น นิ้ว หรือ มิลได้นะครับ
Model No. UTG-2600 State of the art, digital ultrasonic thickness gauge is capableof reading wall thickness thru coatings and paint without affecting the measurement
and is packed with the most popular features including basic measurement,
Scanning Capabilities, Adjustable Sound Velocity, and extended memory capabilities.
This dynamic ultrasonic thickness gauge is designed to measure the thickness of
metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass
and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces.
The UTG-2600 ultrasonic thickness gauge will accurately display readings in
either inch or millimeter after a simple calibration to a known thickness or sound velocity.
Specifications:
Model No. UTG-2600
Display type
4-digit LCD w/Back Light
Minimum display unit
0.003 (if>3.93”
0.0003” (if<3.93”)Measuring Range
Standard Mode: 0.040" to 12" in steel
Thru Coating Mode: 0.118” - .905” 3.0 -23mm)
w/standard probeAccuracy
+/- 1%xH + 0.0007” (H=displayed value)
Sound velocity range
3280-32805 ft/s (1000-9999m/s)
Upper/Lower Limit Preset Alarm
Yes
Operating temperature
32-122 degrees F
Frequency
4MHz
Update range
4Hz
Memory
500 Test Values
Mini-Printer
Optional
Power supply
3v AA alkaline batteries (2pc)
Battery life
Approx. 100 hours (w/backlight off)
Power consumption
Working current is less than 3V
Dimensions
5.86” x 2.87” x 1.25” (149 x 73 x 32mm)
Weight
5.6oz (160g)